(this may take a few minutes to Download Please be patient)
(Some pics can be clicked on to enlarge)
Bullet Turn Signal Indicator Lenses
(With or Without slots) with o- ring and stainless steel washer
Bulbs for Mopar Turn Signal Indicators
Two for $5.00+S/H
Bullet Turn Signal Indicator Mounting Brackets
Shaped the same as the fender underneath, a must for mounting bullet indicators
1970 Plymouth Hood Mounted Turn Signal Indicators
GTX& Roadrunner, new housing, Triple Plated Chrome, new lenses, new wires & bulbs $250.00/set+S/H
1969 Roadrunner & Satellite Tail Light Lenses
High Strength Polymer, Correct Number & Color
1969 Plymouth GTX & Sport Satellite
Tail Light Lenses
Polymer, High Strength, Correct Numbers & Colors $175/set+S/H
Turn Signal Indicator Wires Used on 60's and early 70's Mopars. Wire can be ordered complete or with the crimped bullet end separate. If ordered separate , crimped bullet end and heat shrink can be installed once wire is inserted into indicator. Custom Fit for your car. $35.00/set+S/H
1970 Plymouth GTX/ Roadrunner Turn Signal Indicator Lenses - $50.00/set+S/H
1968 Plymouth GTX/ Roadrunner Tail Light Lenses lenses only bezels not included.$175.00/set+S/H THESE ARE ORIGINAL LENSES!
1966 Plymouth Fender Mounted Turn Signal Indicator Lenses Will fit 67' Coronet and 68' Cuda.
Misc. Mopar Fender Mounted Turn Signal Indicator Lenses Fits years from 62' to 72'
Chrysler 300 Turn Signal Indicator Lenses
1970 Cuda Fender mounted Turn Signal
1970 Charger Hood Mounted Turn Signal Indicators Perfect reproductions with correct reflective paint.
1968-70 Headrest Chrome Clips
Perfect reproductions and rechromed originals available sold as a set of 4
(Please specify if you have Bench or Bucket Seats.)
$150.00/set of 4 +S/H
Dennis J. Mullen
534 Mars St.
Johnstown, PA 15905
Email Address: firstname.lastname@example.org
Web Site www.Krusinmoons.com
KRUSIN MOONS MOPAR SPECIALITIES
(Prices Subject to change without notification)
1968-70 B-BODY (MOPAR) CONVERTIBLE REAR SIDE PANELS (NEW FIBERGLASS)
(All holes are precut, they are grey in color, for an additional $125 they can be painted to match
$525.00/set+S/H CURRENTLY OUT OF STOCK
MOPAR BEVELED FACE TURNSIGNAL INDICATORS 1966-68.
These are perfect reproduction used on most Plymouth and Dodges, they are triple plated chrome with new lenses, wires, bulbs and mounting hardware. Baseplates are threaded on to make lense replacement easy. Come with or without front mounting holes.
1962-74 MOPAR TURNSIGNAL IND.
Rectangular Face Lenses. These indicators are perfect reporductions, that have been triple plated chrome.
New Lenses, wires, bulbs and mounting hardware. The baseplates have been threaded on, making lense replacement easy.
MOPAR TURNSIGNAL IND. 1971 CUDA
New turnsignal indicators, new housings, new lenses, new wiring harness with correct threaded cap & newbases. Picture shown with 15" wires for Cudas, 32" & 48" wires; also available for the Challengers, RR/GTX, housing comes primered; can be painted color of car or chromed. $150.00/set + S/H
MOPAR INDICATOR WIRES.
1970-71 CUDA,CHALLENGER, RR/GTX ETC.
These are perfect reproduction indicator wires with all the new hardware. The 70&71's have a dimpled threaded cap this is where the ground is picked up at to light up the lenses. The caps are cadium plate and come in lengths of 15" 32" & 48" or we can make them to fit.
70 CUDA TURNSIGNAL
INDICATORS & HARDWARE
COMPLETE SET $150.00 + S/H
MOUNTING BASES $10.00/PR
UNDER FENDERWIRE RUBBERS & WASHERS $5.00/PR
TOP OF FENDERMOUNTING STUD
HOLE TOP OF FENDER
1968 GTX Tailpanel emblem
Perfect reproductions w/ either threaded or push on retainer studs
1968- 69 Charger Turn Signal Indicator Wires
Correct reproductions, comes complete as shown in picture with bulbs and sockets.
1968- 69 Charger Turn Signal Indicator Lenses Complete Set
Hood Mounted reproductions, comes complete as shown in picture with wires, bulbs, sockets and retainers. Ready for Instalation
NOTE:retainers can be purchaced separately for
1968- 69 Charger Turn Signal Indicator Lenses and Housings
Hood Mounted reproductions, comes complete as shown in picture.
Note:Lenses and housings can be purchaced separately for$50.00/set+S/H(lenses) $150.00/set+S/H(housings)
1968-69 B-Body Rear Seat Medallion
Triple plated chrome originals with push on retainer studs and clips
1966 Plymouth Sattelite Fender Mounted Turn Signal Indicator Lenses
1968-69 B-Body Front Interior
Made from polished 440 stainless steel, painted with correct red, white and blue colors. Originals use clips these use a machined 6/32 screw, all hardware to mount provided.
1967 GTX, Sattelite, Belevedere
Tail Panel Key Surrounds
Perfect triple plated reproductions
1967 Charger turnsignal indicators
Perfect reproductions ready to install
Front View Rear View
1969-70 Plymouth Bumperette Rubber
Fits Front & Rear 69 RR, GTX, Sport Satellite, Satellite & Belevedere
Also fits 70' Rear RR, Satellite, Belevedere & GTX
(comes with nuts for the mounting studs)
Krusin Moons Front Plates
Choice of either Red or Black GTX
$18.00 + S/H
1966 Barracuda Fender Mounted Turn Signal Indicator Lenses
1970 Charger Hood Mounted Turn Signal Indicator SetPerfect reproductions in every way, new housings, wires lenses, jumpstrap & hardware. Ready to mount and go.
1969 Plymouth GTX/ Sport Sat. Grille Brackets
Sold as a pair, ready to install
$40.00/pair + S/H
DODGE DART RUBBER BUMPERETTS 1967-69 .MADE FROM TODAYS HIGH QUALITY RUBBER.THE PAIR COMES WITH FLANGE NUTS.$90.00/PR.FRONT/REAR
DODGE SUPERBEE/CORONET FRONT/REAR 1968-69 RUBBER BUMPERTTS.MADE OF TODAY'S HIGH QUALITY RUBBER.THE PAIR COMES WITH FLANGE MOUNTING NUTS. $90.00/PR.